0 Members and 1 Guest are viewing this topic.
OT & Newbie question lang mga master..... Merun ako Maldol avr with 1.5Kv (220-110-&100Vac output), and i used 100vac for my vintage (420w-unit) int amp but every time na power On ko yun amp eh merun ako naririnig na "TUG" sound pero iba naman tunog nya kung nag swing yun wifer ng servo...
Parang Tripath din ang consumption and heat output Mainit pa ata yung detubo ko na amp bwahahaha
vibration ng casing ng regulator yun nadidinig mo caused by inrush current.
Actually a 1000W stepdown xformer will consume around 50W , unloaded.Plantsa sa buhok.
higpitan mga scews... lagyan ng loctite...
fyi: yun threadlocker red paps ha... hindi yun contact glue.... madami sa Avenida (5th or 6th ave) or sa Binondo... di pa ako nakakita sa ACE niyan eh...
Parang gasket maker din ba to??? Nakita ko kasi nakasulat "Engines"...
nope hindi siya silicone type, gamit sa mga turnilyo ng engines para di lumuwag due to vibrations...
Ahhh i see. Pero hindi naman mahirap tanggalin yung screw when its time to remove na? Parang pang hold lang sya para hindi aalog-alog??? Mukang pede siguro sa screws ng pinto sasakyan para matanggal yung ingit?
meron plantsa na Class D?
no no no. hindi po loss yung unused wattage. a 500w avr will only consume around 15-20 watts on top of the load. so if the 110v amp consumes 400 watts, the total consumption is only 420 watts.
I have the same experience brader, me "thug" yung reciever pg power on ko using the omni 1500 watt avr, when i used the STAC 1000 watt avr nawala. Both are servo type.
Yung samwon ko tumutunog din pag on ng AMP, pero parang hindi naman thug, parang ramdam ko lang umikot bigla yung servo. Pero dahil nilipat ko na yung servo avr ko, at pinalitan ko ng convertional avr, wala ng tunog hehe! Hindi ko nga lang sure kung magkakaproblema ako in the future dahil hindi servo yung gamit ko.
makapag-invest nga sa higher avr para lang cgurado, currently just using maldol 500w (naka-plug ay pana 42c10, samsung bd player at denon avr1912)
I just use the 262 enough strength for electronic goodies. Masyado ng matigas yang 271 hirap ng tanggalin pang auto na yan master;D
ilang watts ang 1912? kailangan mo nga magupgrade.
yung mga naka 220V po ba naka avr din? or surge protect (tama ba term ko?)
ahh so parang 220V + AVRsame lng po ng 110V + AVR? in terms of power consumption or mas maaksaya prin sa kuryente si 110v + avr?
hindi ba sa amp un?
wala kayo sa lolo ko! mali mali... wala kayo sa CDR king avr ko... walang "thug" yun pag power ON ng rxv1700 ko... maluluwag ang mga turnilyo at maninipis ang kaha ng mga regulators ngayon kaya ganun... lagyan ng deadening material para mawala...