Topic: DYI Digital Coax Without Soldering / Plug and Play Type

[mrk_cute]

Mga sirs, ok ba yung DYI na digital coax na pina plug lang yung RCA head dun sa coax cable? I was shopping around sa raon (deeco) one time and i was on a hunt for a good quality RCA head for my DYI cable and sinuggest nung saleslady yung set ng RCA plug na may roskas tapos ikakabit lang yun sa RG6 na coax tapos ok na. Di ko matandaan yung tawag eh pero bumili rin ako and built one cable to test it out, ok naman sya, tanong ko lang kung mas ok yun kesa dun sa DYI na coax na sinosolder pa yung cable sa loob ng RCA plug?

[mrk_cute]

Ooops!.. replacing all DYI to DIY.. hehe 

[audiojunkie]

sir depende kun tightly screwed yong center wire to the connector.... and your RG6 is audio quality 75 ohms has better signal transmission .... 

[mrk_cute]

I see, siguro nga it all depends on how tight the connection is. I also got a pix on the said RCA plug, see below:



ganito yung sinasabi ko plus meron pang kasamang circular screw to seal the coax cable to the rca head.

Meron na bang nakagamit nito sa inyo?

[mrk_cute]

Mga sir moderators, pa lock naman nitong thread nato, nilipat ko na yung topic sa interconnect forum where it is appropriate.. thanks!